Ip sim dialer with unlocking compatible with most

Ip sim dialer with unlocking compatible with most GSM mobile phonesWith unlocking most GSM phones also How to use: 1. The software interface Ip card setting tool Reset Save..the speed of reading card Defaulted setting Switch setting speed password mode Open 1.Continuous dialing 2. Direct dialing . 8 Call back Close User introduction A. Now the software can only support SIM card reader with driver B. The speed of SIM card reader is set to be 7.2Hz C. The installation of SIM card and IP CALL card and the reader D. The measure of using the software 1. When all the work is done then you can use the software, press the button and the system will write the setting automatic into card 2. Don't pull out the reader. If so, please press the reset button when rewrite. 5.The setting rule of IP call short messages A Allow to dial ( multidigit) B Restriction of dialing (mulitidigit) C Password (multidigit) D Open and close,0 means close, 1 means open E Service centre, 1 or 2 F Languages 1 English 2 Simplified Chinese 4 traditional Chinese G Speed 0 to 9 H Turn + to 00, 1 means close, 0 open I Mode 1---9 J The number setting of service centre 1(mulitidigit) K The number setting of service centre 2(mulitidigit) L The number setting of service centre 3(multididigit) Notice 1. When the number is multidigit, DO means open and close, 0 means close when the number is multidigit, set like it 2. B0810#12#11,B means the restriction condition of dialing, 08 is the following (two digit)10 #12#11 means the content(ABCJKL are mutildigit, the length of them should be number( 2 digits) 3. The length of SMS cannot be more than 60digits 4. SMS must be set and saved in SIM card. Ipset should be added to SMS For example The illustration # is content means all B means restriction A means allow Welcome to ask for its instruction Contact: Rachel Tel: 86 755-25321739 ext.813 Mobile: 86 13480774266